Image 1

Wheel loader 4670 Z

Standard equipment wheel loader 4670 z

  • 4-cylinder diesel engine Kubota V2403-CR-T, 48.6 kW (66 HP)
  • DOC and DPF for compliance with Stage V emissions standards
  • Hydrostatic four wheel drive with automotive control
  • High-pressure drive HD-plus
  • Tyres 11.5/80-15.3 AS, offset +40
  • HTF (High Traction Force)
  • SPT (Schäffer Power Transmission)
  • ECO Mode
  • Hydraulic quick gear 20 km/h switchable under load
  • Original Schäffer planetary axles with self-locking differentials, wide design 6 hole
  • Combined oil cooler
  • Multiple disk brake, maintenance free; service and parking brake
  • Maintenance free articulated pendulum joint
  • Restraining system for protection roof
  • LED working headlights on protection roof version: 1 x on the boom; cabin version: 2 x front, 1 x rear
  • Z-bar boom with parallel lift
  • Additional control device electrically switchable on joystick
  • Working hydraulics standard / options: 76 / 70 + 70 (double gear pump) 108 l/min MHF
  • Adjustable steering column
  • Hour meter, rev, counter, fuel control lamp and temperature indicator
  • Armrest right hand side
  • Rear weight end plate
  • Main battery switch (cab version)
  • Wide chassis
  • Driver-on-board switch
  • Headstock type wheel loader with hydraulic tool lock

Technical data wheel loader 4670 z

  • Engine
    • Type: 4-cylinder diesel engine Kubota V2403-CR(-T)
    • Capacity / option: 48.6 kW (66 HP)
    • Exhaust gas treatment / emission level: DOC, DPF, Stage V
  • Tyres
    • Standard tyres: 11.5/80-15.3 AS, ET+40
    • Option I: 15.0/55-17
    • Option II: 425/55-17
    • Option III: 33x15.5-16.5 SKD, ET+35
  • Electric system
    • Operating voltage: 12 V
  • Sounds and vibration
    • Sound pressure level LpA: 85 db(A)
    • Sound power level guaranteed LwA: 101 db(A)
    • Sound power level equivalent LwA: 100 db(A)
    • Hand/arm vibration acc. to ISO 8041: <2,5 m/s²
    • Total body vibration acc. to ISO 8041: <0,5 m/s²
  • Drive
    • Traction hydraulics: Hydrostatic-automotive
    • Axles: Original Schäffer axles, 6 wheel nut rim; planetary axle and automatic limited slip brake
    • Speed / option: 0 - 20 kph, 2 speeds gear switching under load possible / 0 - 30 kph
  • Brakes and steering
    • Service braking system: Combined brake hydrostatic and multi-disc brake
    • Parking brake: Multi-disc brake running in oil bath
    • Steering: Fully hydraulic articulated/swivel steering
  • Tank capacity
    • Fuel: 95 l
    • Hydraulic oil: 95 l
  • Dimensions
    • (A) Wheelbase: 2,000 mm
    • (B) Chassis length: 4,080 mm
    • (C) Overall length with standard bucket: 4,760 mm
    • (D) Digging depth: 120 mm
    • (E) Max. working height: 4,060 mm
    • (G) Loading height with pallet forks: 3,050 mm
    • (H) Max. dumping height: 2,500 mm
    • (I) Front end height: 1,570 mm
    • (J) Dumping width: 640 mm
    • (K) Seat height: 1,270 mm
    • (L) Protective roof height: 2,270 mm
    • (L) Cab height: 2,270 mm
    • (M) Max. bucket pivot point: 3,260 mm
    • (N) Overall width / option: 1,420 (1,580 turned) / 1,420 - 1,730 mm
    • (O) Inner turning radius: 1,425 mm
    • (P) Outer turning radius: 2,845 mm
    • (Q) Outer radius with standard bucket: 3,175 mm
  • Working hydraulics
    • Delivery rate: 76 l/min / 70 + 46 (double gear pump) l/min / 115 (MHF) l/min
    • Operat. pressure: 210 bar
  • Weights
    • Operating weight protective roof incl. Original tyres, driver and standard bucket: 3,400 kg
    • Operating weight cabin incl. Original tyres, driver and standard bucket: 3,520 kg
    • Lifting capacity: 2,400 kg
    • Tipping load, straight, pallet fork acc. to ISO 8313: 1,823 - 2,149 kg
    • Tipping load, straight, bucket acc. to ISO 8313: 2,120 - 2,428 kg
    • Tipping load, articulated, pallet fork acc. to ISO 8313: 1,700 kg
    • Tipping load, articulated, bucket acc. to ISO 8313: 1,950 kg
    • Payload, pallet fork, even ground acc. to EN 474-3: 1,136 kg
    • Payload, pallet fork, uneven ground acc. to EN 474-3: 852 kg
    • Payload bucket acc. to EN 14397-1: 880 kg
  • Transport of materials
    • Specific material weight: 1,6 t/m³
    • Bucket volume acc. to ISO 8041: 0,55 m³
    • Recommended bucket width: 1,3 m
Dimensions wheel loaders
Notice
All specifications are subject to change. Optional equipment and tyre dimensions may vary operating weight and tipping loads. The Euro type headstock and foreign attachments may have a negative impact on tipping load and parallel lift. Images may contain products or equipment components which are not mentioned or cannot be obtained as a standard. Maximum values for tipping loads and payloads can only be reached with additional ballasting.

Tyres wheel loader 4670 z

Dimension

Meter (mm) /Width (mm)

Rimoffset

Loader width (mm)* Tread Tread options
11.5/80-15.3 860 / 295 40 1,420 (1,580) AS MPT
11.5/80-15.3 860 / 295 -5 1,500 AS MPT
15.0/55-17 860 / 390  85 1,420 AS  
15.0/55-17 860 / 390 45 1,510 (1,690) AS  
15.0/55-17 860 / 390 0 1,590 AS  
15.0/55-17 860 / 390 -40 1,670 AS  
425/55-17 900 / 425 45 1,540 (1,730) AS  
425/55-17 900 / 425 0 1,630 AS  
425/55-17 900 / 425 -40 1,710 AS  
425/55R17 900 / 425 45 1,540 FL693 M  
425/55R17 900 / 425 0 1,630 FL693 M  
425/55R17 900 / 425 -40 1,710 FL693 M  
440/50-17 880 / 440 45 1,550 Allground  
440/50-17 880 / 440 0 1,640 Allground  
33x15.5-16.5 840 / 395 35 1,530 SKD  

Additional materials available for download

Need help? Have you made up your mind? Or got a question on our products?

Find your local dealer or contact us. Simply fill in the contact form or give us a call.