Image 1

Telescopic wheel loader 24e T

Standard equipment telescopic wheel loader 24e t

  • Electric motor drive: 21 kW; electric motor working hydraulics: 9,7 kW
  • Electric four wheel drive with cardan shaft
  • Li-Ion battery pack, 240 V / 15.65 kWh (31.3 kWh on option)h
  • On-board charger with Type 2 connector enables charging at a 230V power outlet (3 kW) or a wallbox (11 kW)
  • Charging cable type 2 / CEE 16 A, 4 m
  • Battery management system
  • Energy recuperation
  • Hill-Hold funktion: ?start up assistant? to make hill starts easier
  • Tyres 31x15.5-15 SKD, offset 0
  • 20 km/h
  • Eco mode to extend the operating time
  • Original Schäffer axles, wide design
  • Ferro-form sliding elements in the telescopic arm
  • Tool cylinder in the telescopic arm
  • Pressure relief 3rd control circuit electrically
  • Water cooling of electric motors
  • Multiple disk brake, maintenance free; service and parking brake
  • Maintenance free articulated pendulum joint
  • Restraining system for protection roof
  • LED working headlights on protection roof version: 1 x on teleacopic arm; cabin version: 2 x front, 1 x rear
  • Acoustic reverse warning signal (can be switched off)
  • Z-bar boom with parallel lift
  • Electronically operated additional controller
  • Working hydraulics: 42 l/min
  • Adjustable steering column
  • Hour meter, range display and charging status display
  • Counter weight 100 kg mounted under rear chassis
  • Rear weight end plate and towing hitch
  • Main battery switch
  • Wide chassis with wider fender
  • Tool Box
  • Driver-on-board switch
  • Quick-change frame SWH with hydraulic tool lock

Technical data telescopic wheel loader 24e t

  • Engine
    • Output: Drive: 21 kW
    • Working hydraulics: 9.7 kW
  • Tyres
    • Standard tyres: 31x15.5-15 SKD
    • Option I: 31x15.5-15 AS
  • Electric system
    • Operating voltage: 12 V
  • Dimensions
    • (A) Wheelbase: 1,870 mm
    • (B) Chassis length: 3,900 mm
    • (C) Overall length with standard bucket: 4,700 mm
    • (D) Digging depth: 90 mm
    • (E) Reach: 1,570 mm
    • (F) Swivelling point, telescopic arm retracted: 3,100 mm
    • (G) Loading height with pallet forks: 3,470 mm
    • (H) Max. dumping height: 3,010 mm
    • (I) Front end height: 1,580 mm
    • (J) Dumping width: 820 mm
    • (K) Seat height: 1,160 mm
    • (L) Protective roof height: 2,190 mm
    • (L) Cab height: 2,140 mm
    • (M) Max. bucket pivot point: 3,720 mm
    • (N) Overall width / option: 1,500 / 1,410 - 1,590 mm
    • (O) Inner turning radius: 1,150 mm
    • (P) Outer turning radius: 2,650 mm
    • (Q) Outer radius with standard bucket: 2,950 mm
  • Drive
    • Traction hydraulics: 4-wheel-drive, fully electric
    • Axles: Original Schäffer axles, 6 wheel nut rim
    • Speed: 20 km/h
  • Brakes and steering
    • Service braking system: Multi-disc brake running in oil bath
    • Parking brake: Multi-disc brake running in oil bath
    • Steering: Fully hydraulic articulated/swivel steering
  • Tank capacity
    • Hydraulic oil: 30 l
  • Working hydraulics
    • Delivery rate: 42 l/min
    • Operat. pressure: 180 bar
  • Weights
    • Operating weight protective roof incl. Original tyres, driver and standard bucket: 2,750 kg
    • Operating weight cabin incl. Original tyres, driver and standard bucket: 2,815 kg
    • Lifting capacity: 1,600 kg
    • Tipping load, straight, pallet fork acc. to ISO 8313: 1,275 kg
  • Sounds and vibration
    • Sound pressure level LpA: 64 db(A)
    • Sound power level guaranteed LwA: 99 db(A)
    • Sound power level equivalent LwA: 90 db(A)
    • Hand/arm vibration acc. to ISO 8041: < 2.5 m/s²
    • Total body vibration acc. to ISO 8041: < 0.5 m/s²
Dimensions telescopic wheel loaders
Payload chart 23e T, 24e T
Notice
All specifications are subject to change. Optional equipment and tyre dimensions may vary operating weight and tipping loads. The Euro type headstock and foreign attachments may have a negative impact on tipping load and parallel lift. Images may contain products or equipment components which are not mentioned or cannot be obtained as a standard. Maximum values for tipping loads and payloads can only be reached with additional ballasting.

Tyres telescopic wheel loader 24e t

Dimension Diameter (mm) / Width (mm) Rim offset Loader width (mm)*   Tread Tread options
31x15.5-15 770 / 400 45 1.410 AS SKD
31x15.5-15 770 / 400 0 1.500 AS SKD
31x15.5-15 770 / 400 -45 1.590 AS SKD

Need help? Have you made up your mind? Or got a question on our products?

Find your local dealer or contact us. Simply fill in the contact form or give us a call.